Hello friends, you will know very well about automobile engine, and how it works. And on what principle does it work? When an engine starts. So it goes on continuously. Unless it is turned off, there are many moving parts in the engine. who go on continuously. Due to the continuous running of the engine, due to the wear and tear of the parts fitted in it, some defects keep appearing in the engine from time to time. Which needs to be treated. Today we will know about those defects, so let’s see what are Engine Problems. and how to treat them
What are common engine problems?
Is sound coming from the engine?
Normal sound in an engine. Which is of the engine. But when there is a fault in the engine. So there is some change in the sound of the engine for which there are some reasons which are as follows –
- The main bearing is damaged.                 Overhauling the engine in this situation
- The sound is coming from the valve.           Check valve fitting and replace if necessary
- A piston is loose.                               overhaul the engine in this type of condition
- The piston pin has become loose.               Use another pin instead
- The pin of the connecting rod has become loose, broken, or bent.          check the pin and replace the                                                                         bearing
The engine not turning over when starting
Some of the following types of defects can occur are given below –
- Engine jammed.                           Check Engine and Troubleshoot Jam
- A wire in the starting circuit is broken.      check the circuit and remove the problem
- The battery is discharged or damaged.      charge the battery and replace the dead battery
- The pinion of the self-starter is jammed.    Check Pinion and Troubleshoot
Read Also    Engine cc | what does engine cc mean?
The engine is turning but won’t start
Some of the reasons for this type of Engine Problems can be –
- There is something wrong with the fuel system of the engine.     Check and Troubleshoot the Fuel                                                                      System
- There is a fault in the ignition system.                            check the circuit of the ignition system
The engine does not get full power
Some of the reasons for this type of Engine Problems can be –
- Carbon has accumulated in the combustion chamber.   remove carbon from the engine
- The compression stroke is reduced.                    Check valves and rings and overhaul the engine if                                                           needed
- Shortage of fuel supply or bad fuel.                    Troubleshoot and troubleshoot
- There is a fault in the ignition system.                  Troubleshoot by checking the system
Engine overheats
Some of the reasons for this type of Engine Problems can be –
- There is some fault in the cooling system of the engine.    Check and Troubleshoot the Cooling System
- Engine oil has decreased.                                Fill in a proper amount of engine oil
- There is a fault in the ignition timing.                     correct ignition timing
Fuel consumption increasing
Some of the reasons for this type of problem can be –
- The pump is leaking.                                        stop pump leakage
- Something is wrong with the carburetor.                     Eliminate the deficiency by checking the                                                               carburetor
- Ignition is not correct.                                       correct ignition timing
- Compression is leaking or valves are not working properly.   Investigate the problem and eliminate the                                                             deficiency
- The alignment of the wheels is not correct.                  Correctly adjust the alignment of the                                                                  wheels
Engine backfiring
There can be some reasons for this type of problem –
- There is a fault in the ignition timing.        Check and correct ignition timing
- There is a fault in the spark plug.            Check and remove spark plugs and replace if necessary
- The engine has overheated.                  fix the problem by finding the cause
- The fuel ratio is not correct.                 fix the problem by finding the cause
Engine overheats and stalls
Some of the reasons for this type of problem can be –
- Air gets locked.                  Check and Troubleshoot Air Locks
- The engine has overheated.       fix the problem by finding the cause
Engine stalls at a slow speed
Some of the reasons for this problem can be
- The engine heats up quickly.            Troubleshoot the engine and check engine
- There is a fault in the fuel pump.        Check and Troubleshoot the Fuel Pump
- The slow-running jet has stopped.       Clear Slow Jet
What are the causes of smokey exhaust
If the mixture in the engine burns excessively, then black smoke comes out in the exhaust. And if the oil burns more. So blue smoke comes out. Due to this the life of the engine is reduced.
Black smoke can be caused by the following
a spark plug is not good
check valve stuck
Ignition timing is bad and not working properly
The needle valve in the carburetor is left open or the float is punctured
a piston ring is broken or sticking
Due to blue smoke
The engine cylinder bore is damaged
The amount of oil in urine is increasing
The crankcase oil seal damaged
How does a two-stroke petrol engine overheat?
Engine overheating can be due to some of the following reasons
The amount of petrol in the mixture is high
A spark plug is not good
Low tire pressure
The car is running at high speed
Ignition timing is not correct
Now you know what are the defects in an engine. and how to fix them. How did you like this post, send us your suggestions in the comment box and also share the post with others. AND FOLLOW US ON FACEBOOK AND INSTAGRAM
Thank you
